ImpulseRC Apex 3inch PNP- by FE

FROM FLYING ELECTRONICS:-

We have taken proper care to maintain factory standards while assembling Quads and have used High quality Solder (TBS Flux). The Analog version comes with PANDARC VT5804 MINI X 20*20 5.8GHZ 25-400MW VTX and Happymodel EP1 Pre-installed.

Motors : NewbeeDrone Flow Motors 1408 2350kv

The Micro Apex incorporates all of the unique innovations pioneered by ImpulseRC and now widely imitated. From the compressed-X arm geometry, integrated camera tilt, front box-section and split main plate design, to our custom shoulder bolts and arm locking key. At the centre of mass where the arms meet there is a massive 8mm of carbon fibre, taking the stiffness of a micro frame to a new dimension so you can enjoy unsurpassed flight characteristics at this prop size.

You can expect zero arm slop or movement, zero vibration or resonance, and of course that proven ImpulseRC durability you can always trust. All backed up with our full crash damage warranty that covers all carbon fibre and metal parts for 1 year from the date of purchase.

• Full crash damage warranty on all parts for 1 year
• Perfect for Caddx Vista, 4K Tarsier or classic analog setup
• No props in shot of flight camera with 3” arms
• Dual stack, 20x20 M3 and M2 centre, 20x20 M2 rear
• Fits M2 9x9mm motors and M2 12x12mm motors
• Injection moulded arm skids and front bumper
• Injection moulded fitted wire guards to protect from prop strikes
• Two battery pads included, 2mm rubber and ultra-light hook pad
• Custom fitted Racewire available for 4” arms
• 3” frame weight 58g, carbon fibre + hardware
• 4” frame weight 61g, carbon fibre + hardware
• 4mm thick arms, single shoulder bolt per arm
• 2mm thick upper and lower main plates
• 1.5mm thick top and camera plates

CARBON